Over 18s only sign
Commercial quality Over 18s only sign, made in the UK by professional sign makers.
Our premium quality sign products will far outlast the screen printed versions!
Available in 3mm Aluminium, 3mm PVC or Self-Adhesive vinyl.
100% weatherproof and solvent resistant sign products for all climates!
Not screen printed which can fade & is easily scratched!
Solvent printed & over laminated using high-quality commercial-grade materials!
Our signs are supplied NOT DRILLED unless clearly requested.
Self Adhesive Vinyl. Commercial grade, permanent self-adhesive vinyl, over laminated for scratch resistance. For smooth flat surfaces only.
3mm PVC. Premium industry standard PVC sign board 3mm thick with high impact strength & excellent UV protection, over laminated for scratch resistance.
3mm Aluminium. A lightweight but extremely strong 3mm thick rigid aluminium composite panel with a nylon core ideal for long-term external use, over laminated for scratch resistance.
Other sizes available just ask.
Sign & STICKER Fixing Instructions
Self-adhesive vinyl stickers
*your vinyl sign comes on a wax backing paper which needs to be removed exposing the adhesive on the back.
For smooth flat surfaces CLEAN only.
*Important! Do not use any oil or wax-based products such as white spirit, turpentine or furnisher polish to clean the area as this will leave a residue that will stop your sign sticking.
We recommend Methylated spirits as this evaporates away in seconds & leaves no residue.
*not suitable for brick, render or textured surfaces!
Ensure the area that your sign is being applied to is dry & clean. Mark where the sign is to be fixed with a piece of tape. Remove sign from backing paper & position, use a squeegee or credit card & work from the middle out.
PVC & Aluminium signs
We recommend that you pre-drill your sign before fixing if using screws
*(Do not try to nail or screw through the sign without drilling).
It is advisable that you use a drill bit that is 2mm larger than the screws that are to be used, this allows for expansion & contraction due to temperature changes.
If you use an adhesive such as ‘No Nails’ you will need to support the sign until the adhesive has cured.
We do not pre-drill our signs unless specifically requested to do so.
Holes can be added but not removed!
Use a mild detergent to wash your sign to keep it looking bright for years to come.
Stubborn marks can be removed with Methylated spirits.